Questions? Feedback? powered by Olark live chat software

CCNP Routing & Switching (Professional) Combo Training Courses

About the CCNP Routing & Switching (Professional) Combo

Duration: 15 days (120 hours)

NetCom is a Cisco Learning Partner

Implementing Cisco IP Routing (ROUTE), Implementing Cisco IP Switched Networks (SWITCH) and Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) are the three courses that are recommended for CCNP candidates.

NetCom Learning's CCNP Boot Camp provides Cisco IT professionals with the advanced knowledge and skills necessary to support Cisco based networks. This is a performance-based course designed upon the job-related tasks an advanced professional must perform using new or modified features in the Cisco Systems.

The new CCNP program maintains its focus on the advanced skills required to manage the routers and switches that form the network core, but also expands to include techniques to deploy and support wireless, voice, and security applications on the network edge.

Objectives
  • Plan and document the configuration and verification of routing protocols and their optimization in enterprise networks.
  • Identify the technologies, components, and metrics of EIGRP used to implement and verify EIGRP routing in diverse, large-scale internetworks based on requirements.
  • Identify, analyze, and match OSPF multiarea routing functions and benefits for routing efficiencies in network operations in order to implement and verify OSPF routing in a complex enterprise network.
  • Implement and verify a redistribution solution in a multi-protocol network that uses Cisco IOS features to control path selection and provides a loop-free topology according to a given network design and requirements.
  • Evaluate common network performance issues and identify the tools needed to provide Layer 3 path control that uses Cisco IOS features to control the path.
  • Implement and verify a Layer 3 solution using BGP to connect an enterprise network to a service provider.
  • Analyze campus network designs
  • Implement VLANs in a network campus
  • Implement spanning tree
  • Implement inter-VLAN routing in a campus network
  • Implement a highly available network
  • Implement high-availability technologies and techniques using multilayer switches in a campus environment
  • Implement security features in a switched network
  • Integrate WLANs into a campus network
  • Accommodate voice and video in campus networks
  • Planning Maintenance for Complex Networks
  • Selecting Maintenance and Troubleshooting Tools and Applications
  • Planning Troubleshooting Processes for Complex Enterprise Networks
  • Maintaining and Troubleshooting Campus Switching-Based Solutions
  • Maintaining and Troubleshooting Routing-Based Solutions
  • Maintaining and Troubleshooting Network Security Solutions
  • Maintaining and Troubleshooting Integrated, Complex Enterprise Networks

Next Class Dates

Contact us to customize this class with your own dates, times and location. You can also call 1-888-563-8266 or chat live with a Learning Consultant.

Back to Top

This training consists of the following courses:

Implementing Cisco IP Routing v2.0 - ROUTE (Professional)   More on this course

5 days | 40 hours

arrow Course Objectives

  • » Routing protocols, network technologies, and remote connectivity options
  • » RIPng in an IPv6 environment
  • » Technologies, operations, and metrics that EIGRP uses
  • » Configure and verify EIGRP in IPv4 and IPv6 environments including optimizing its behavior and named EIGRP configuration
  • » Multiarea OSPF including over different network types and how to optimize its database
  • » Configure and verify OSPFv2 in IPv4 environments and OSPFv3 in IPv4 and IPv6 environments
  • » Route redistribution and how it is implemented using distribute list, prefix list, and route map filtering mechanisms
  • » Use Cisco Express Forwarding for efficient Layer 3 packet forwarding
  • » Implement path control using policy based routing and IP Service Level Agreement (SLA)
  • » Establishing enterprise Internet connectivity for IPv4 and IPv6
  • » BGP for enterprise IPv4 and IPv6 Internet connectivity
  • » Secure Cisco routers according to best practices including the configuring routing protocol authentication

Back to Top

arrow Course Outline

  • Basic Network and Routing Concepts
    1. Differentiating Routing Protocols
    2. Understanding Network Technologies
    3. Connecting Remote Locations with the Headquarters
    4. Implementing RIPng
  • EIGRP Implementation
    1. Establishing EIGRP Neighbor Relationships
    2. Building the EIGRP Topology Table
    3. Optimizing EIGRP Behavior
    4. Configuring EIGRP for IPv6
    5. Discovering Named EIGRP Configuration
  • OSPF Implementation
    1. Establishing OSPF Neighbor Relationship
    2. Building the Link State Database
    3. Optimizing OSPF Behavior
    4. Configuring OSPFv3
  • Configuration of Redistribution
    1. Implementing Basic Routing Protocol Redistribution
    2. Manipulating Redistribution Using Route Filtering
  • Path Control Implementation
    1. Using Cisco Express Forwarding Switching
    2. Implementing Path Control
  • Enterprise Internet Connectivity
    1. Planning Enterprise Internet Connectivity
    2. Establishing Single-Homed IPv4 Internet Connectivity
    3. Establishing Single-Homed IPv6 Internet Connectivity
    4. Improving Resilience of Internet Connectivity
    5. Considering Advantages of Using BGP
    6. Implementing Basic BGP Operations
    7. Using BGP Attributes and Path Selection Process
    8. Controlling BGP Routing Updates
    9. Implementing BGP for IPv6 Internet Connectivity
  • Routers and Routing Protocol Hardening
    1. Securing Cisco Routers
    2. Describing Routing Protocol Authentication Options
    3. Configuring EIGRP Authentication
    4. Configuring OSPF Authentication
    5. Configuring BGP Authentication

Back to Top

Implementing Cisco IP Switched Networks v2.0 - SWITCH (Professional)   More on this course

5 days | 40 hours

arrow Course Objectives

  • » Describe the hierarchical campus structure, basic switch operation, use of SDM templates, PoE, and LLDP
  • » Implement VLANs, trunks, explain VTP, implement DHCP in IPv4 and IPv6 environment, and configure port aggregation
  • » Implement and optimize STP mechanism that best suits your network - PVSTP+, RPVSTP+, or MSTP
  • » Configure routing on a multilayer switch
  • » Configure NTP, SNMP, IP SLA, port mirroring, and verify StackWise and VSS operation
  • » Implement First Hop redundancy in IPv4 and IPv6 environments
  • » Secure campus network according to recommended practices

Back to Top

arrow Course Outline

  • Basic Concepts and Network Design
    1. Analyzing Campus Network Structure
    2. Comparing Layer 2 and Multilayer Switches
    3. Using Cisco SDM Templates
    4. Implementing LLDP
    5. Implementing PoE
  • Campus Network Architecture
    1. Implementing VLANs and Trunks
    2. Introducing VTP
    3. Implementing DHCP
    4. Implementing DHCP for IPv6
    5. Configuring Layer 2 Port Aggregation
  • Spanning Tree Implementation
    1. Implementing RSTP
    2. Implementing STP Stability Mechanisms
    3. Implementing Multiple Spanning Tree Protocol
  • Configuring Inter-VLAN Routing
    1. Implementing Inter-VLAN Routing Using a Router
    2. Configuring a Switch to Route
  • Implementing High Availability Networks
    1. Configuring Network Time Protocol
    2. Implementing SNMP Version 3
    3. Implementing IP SLA
    4. Implementing Port Mirroring for Monitoring Support
    5. Verifying Switch Virtualization
  • First Hop Redundancy Implementation
    1. Configuring Layer 3 Redundancy with VRRP
    2. Configure VRRP With Load Balancing
    3. Configuring Layer 3 Redundancy with GLBP
    4. Configuring First Hop Redundancy for IPv6
  • Campus Network Security
    1. Implementing Port Security
    2. Implementing Storm Control
    3. Implementing Access to External Authentication
    4. Mitigating Spoofing Attacks
    5. Securing VLAN Trunks
    6. Configuring Private VLANs

Back to Top

Troubleshooting and Maintaining Cisco IP Networks v2.0 - TSHOOT (Professional)   More on this course

5 days | 40 hours

arrow Course Objectives

  • » roubleshooting methods, approaches, and procedures
  • » Recommended network maintenance practices
  • » Using basic and specialized troubleshooting tools
  • » Troubleshooting:
  • » A redundant Internet gateway or redundant ISP fails to provide backup connectivity
  • » OSPF, EIGRP and BGP issues, including redistribution
  • » HSRP, VRRP, and GLBP issues
  • » EtherChannel issues
  • » Other issues including NTP, DNS, default routes, IP SLAs, AAA, and GRE
  • » When headquarters or branch clients are unable to access internal devices or the Internet
  • » When you are unable to connect to a network device using SSH or Telnet
  • » When devices are unable to acquire a DHCP-provided address

Back to Top

arrow Course Outline

  • Tools and Methodologies of Troubleshooting
    1. Describing Troubleshooting Methodologies
    2. Using Troubleshooting Procedures
    3. Following Recommended Practices During Routine Network Maintenance
    4. Using Basic IOS Troubleshooting Tools
    5. Using Specialized Troubleshooting Tools
  • Troubleshooting at SECHNIK Networking Ltd.
    1. Debrief of the each of the three Troubleshooting at SECHNIK Networking Ltd. Labs
    2. Troubleshooting issues with trunks, NAT, interfaces, IPv6, network layer connectivity, error-disabled ports, DHCP, passive interfaces
  • Troubleshooting at TINC Garbage Disposal Ltd.
    1. Debrief of the each of the four Troubleshooting at TINC Garbage Disposal Ltd. Labs
    2. Troubleshooting issues with BGP neighborship, port security, VLANs, native VLAN, OSPF adjacency, management access, HSRP, routing sources, VRRP, EtherChannel, GLBP, DHCP snooping
  • Troubleshooting at PILE Forensic Accounting Ltd.
    1. Debrief of the each of the five Troubleshooting at PILE Forensic Accounting Ltd. Labs
    2. Troubleshooting issues with EIGRP adjacency, BGP filtering and route selection, NTP, inter-VLAN routing, DNS, remote device management, EIGRP named configuration, EIGRP stub, default routes, management plane security.
  • Troubleshooting at Bank of POLONA Ltd.
    1. Debrief of the each of the four Troubleshooting at POLONA Ltd. Labs.
    2. Troubleshooting issues with redistribution, FHRP tracking, IP SLA, EIGRP summarization, basic RIPng, ACLs, GRE tunnels, OSPF summarization, AAA, OSPF for IPv6, OSPF stub areas.
  • Troubleshooting at RADULKO Transport Ltd. (NOTE: this module is not done in class)
    1. Debrief of the each of the four Troubleshooting at RADULKO Transport Ltd. Labs.
    2. Troubleshooting issues with STP, PBR, CDP, LLDP, VTP, EIGRP for IPv6, MP-BGP, and OSPFv3 address families

Back to Top

This training prepares students for the following exam(s):

  • » 300-135: Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
  • » 300-101: Implementing Cisco IP Routing (ROUTE)
  • » 300-115: Implementing Cisco IP Switched Networks v2.0 - SWITCH

Back to Top

Recent Client Testimonials & Reviews

Great Instructor. Keeps you engaged.

- Paul J.

Course(s) Taken

» CCNA Routing & Switching (ICND1 and ICND2) v3.0 (Associate) Combo

It was clear on the first day that the instructor had a wealth of knowledge. During the class, he imparted that knowledge on us every day, which I am very thankful for. Very good instructor.

- Jeremy J.

Course(s) Taken

» CCNA Routing & Switching (ICND1 and ICND2) v3.0 (Associate) Combo

I am very impressed with the great instructions provided by the instructor.

- Aashish S.

Course(s) Taken

» CCNA Routing & Switching (ICND1 and ICND2) v3.0 (Associate) Combo

  More testimonials »  

Back to Top

Free Training with Cisco Learning Credits (CLC)

Microsoft Software 
Assurance Training Vouchers

As a Microsoft Gold Learning Solutions Partner, NetCom Learning proudly accepts Microsoft Software Assurance Training Vouchers. You can attend Microsoft training at NetCom Learning for free, by redeeming your Microsoft vouchers.

Call 1-(888)-563-8266 for more information.

Back to Top