NetCom Learning

Implementing Cisco Unified Communications Manager, Part 2 v9.0 - CIPT2

Implementing Cisco Unified Communications Manager, Part 2 v9.0 - CIPT2 Course Description

Duration: 5.00 days (40 hours)

Cisco Career Guide

Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) v9.0 prepares you for implementing Cisco Unified Communications solution in a multisite environment. It covers globalized call routing, Cisco Service Advertisement Framework (SAF) and Call Control Discovery (CCD), tail-end hop-off (TEHO), Cisco Unified Survivable Remote Site Telephony (SRST), and mobility features such as Device Mobility and Cisco Extension Mobility.

You will apply a dial plan for a multisite environment including TEHO, configure survivability for remote sites during WAN failure, and implement solutions to reduce bandwidth requirements in the IP WAN. You will also enable Call Admission Control (CAC), including Session Initiation Protocol (SIP) Preconditions and automated alternate routing (AAR).

Next Class Dates

Contact us to customize this class with your own dates, times and location. You can also call 1-888-563-8266 or chat live with a Learning Consultant.

Back to Top

Intended Audience for this Implementing Cisco Unified Communications Manager, Part 2 v9.0 - CIPT2 Course

  • » Network administrators and network engineers
  • » CCNP Voice candidates
  • » Systems engineers

Back to Top

Course Prerequisites for Implementing Cisco Unified Communications Manager, Part 2 v9.0 - CIPT2

  • » Working knowledge of converged voice and data networks
  • » Working knowledge of the MGCP, SIP, and H.323 protocols and their implementation on Cisco IOS gateways
  • » Ability to configure and operate Cisco routers and switches
  • » Ability to configure and operate Cisco routers and switches

Back to Top

Implementing Cisco Unified Communications Manager, Part 2 v9.0 - CIPT2 Course Objectives

  • » Describe multisite deployment issues and solutions, and describe and configure required dial plan elements
  • » Implement call-processing resiliency in remote sites by using Cisco Unified SRST, MGCP fallback, and Cisco Unified Communications Manager Express in Cisco Unified SRST mode
  • » Implement bandwidth management and CAC to prevent oversubscription of the IP WAN
  • » Implement Device Mobility and Cisco Extension Mobility
  • » Describe and implement CCD deployments

Back to Top

Implementing Cisco Unified Communications Manager, Part 2 v9.0 - CIPT2 Course Outline

      1. Module 1: Multisite Deployment Implementation
        1. Lesson 1: Identifying Issues in a Multisite Deployment
        2. Multisite Deployment Issues Overview
        3. Quality Issues
        4. Bandwidth Issues
        5. Availability Issues
        6. Dial Plan Issues
        7. NAT and Security Issues
        8. Lesson 2: Identifying Multisite Deployment Solutions
        9. Multisite Deployment Solution Overview
        10. QoS
        11. Solutions to Bandwidth Limitations
        12. Availability
        13. Dial Plan Solutions
        14. NAT and Security Solutions
        15. Lesson 3: Implementing Multisite Connections
        16. Multisite Connection Options
        17. MGCP Gateway Implementation Review
        18. H.323 Gateway Implementation Review
        19. Trunk Implementation Overview
        20. SIP Trunk Implementation
        21. Intercluster and H.225 Trunk Implementation
        22. Lesson 4: Implementing a Dial Plan for International Multisite Deployments
        23. Multisite Dial Plan Overview
        24. Implementing Site Codes for On-Net Calls
        25. Implementing PSTN Access in Cisco IOS Gateways
        26. Implementing Selective PSTN Breakout
        27. Implementing PSTN Backup for On-Net Intersite Calls
        28. Implementing TEHO
        29. Implementing Globalized Call Routing
        30. Considering Globalized Call-Routing Interdependencies
      2. Module 2: Centralized Call-Processing Redundancy Implementation
        1. Lesson 1: Examining Remote Site Redundancy Options
        2. Remote Site Redundancy Overview
        3. Cisco Unified SRST Operation
        4. MGCP Fallback Operation
        5. Cisco Unified SRST Versions and Feature Support
        6. Dial Plan Requirements for MGCP Fallback and Cisco Unified SRST Scenarios
        7. Lesson 2: Implementing SRST and MGCP Fallback
        8. MGCP Fallback and Cisco Unified SRST Configuration Overview
        9. Cisco Unified Communications Manager SRST Configuration
        10. Cisco IOS Gateway SRST Configuration
        11. Cisco IOS Gateway MGCP Gateway Fallback Configuration
        12. Cisco Unified Communications Manager Dial Plan Configuration for SRST Support
        13. Cisco IOS Gateway MGCP Fallback and Cisco Unified SRST Dial Plan Configuration
        14. Lesson 3: Implementing Cisco Unified Communications Manager Express in SRST Mode
        15. Cisco Unified Communications Manager Express Overview
        16. Cisco Unified Communications Manager Express Features
        17. General Configuration of Cisco Unified Communications Manager Express
        18. Configuration of Cisco Unified Communications Manager Express in SRST Mode
      3. Module 3: Bandwidth Management and CAC Implementation
        1. Lesson 1: Managing Bandwidth
        2. Bandwidth Management Overview
        3. Cisco Unified Communications Manager Codec Configuration
        4. Local Conference Bridge Implementation
        5. Transcoder Implementation
        6. Multicast MOH from Branch Router Flash Implementation
        7. Lesson 2: Implementing CAC
        8. CAC Overview
        9. Standard Locations
        10. RSVP-Enabled Locations
        11. Automated Alternate Routing
        12. SIP Preconditions
        13. H.323 Gatekeeper CAC
      4. Module 4: Implementation of Features and Applications for Multisite Deployments
        1. Lesson 1: Implementing Device Mobility
        2. Issues with Devices Roaming Between Sites
        3. Device Mobility Overview
        4. Device Mobility Configuration Elements
        5. Device Mobility Operation
        6. Device Mobility Interaction with Globalized Call Routing
        7. Device Mobility Configuration
        8. Lesson 2: Implementing Cisco Extension Mobility
        9. Issues when Users Roam Between Sites
        10. Cisco Extension Mobility Overview
        11. Cisco Extension Mobility Configuration Elements
        12. Cisco Extension Mobility Operation
        13. Cisco Extension Mobility Configuration
        14. Lesson 3 Video Integration with CUCM
        15. Telepresence
        16. Lab 9971 Features and Video Integration
      5. Module 5: Call Control Discovery
        1. Lesson 1: Implementing SAF and CCD
        2. SAF and CCD Overview
        3. SAF Characteristics
        4. CCD Characteristics
        5. CCD Operation
        6. SAF and CCD Implementation
        7. CCD Considerations
      6. Lab Outline
        1. Lab 1-1: Implementing Basic Multisite Connections
        2. Lab 1-2: Implementing a Dial Plan for International Multisite Deployments
        3. Lab 2-1: Implementing SRST and MGCP Fallback
        4. Lab 2-2: Implementing Cisco Unified Communications Manager Express in SRST Mode
        5. Lab 3-1: Implementing Bandwidth Management
        6. Lab 3-2: Implementing CAC
        7. Lab 4-1: Implementing Device Mobility
        8. Lab 4-2: Implementing Cisco Extension Mobility
        9. Lab 5-1: Implementing Cisco SAF and CCD

Back to Top

Do you have the right background for Implementing Cisco Unified Communications Manager, Part 2 v9.0 - CIPT2?

Skills Assessment

We ensure your success by asking all students to take a FREE Skill Assessment test. These short, instructor-written tests are an objective measure of your current skills that help us determine whether or not you will be able to meet your goals by attending this course at your current skill level. If we determine that you need additional preparation or training in order to gain the most value from this course, we will recommend cost-effective solutions that you can use to get ready for the course.

Our required skill-assessments ensure that:

  1. All students in the class are at a comparable skill level, so the class can run smoothly without beginners slowing down the class for everyone else.
  2. NetCom students enjoy one of the industry's highest success rates, and pass rates when a certification exam is involved.
  3. We stay committed to providing you real value. Again, your success is paramount; we will register you only if you have the skills to succeed.
This assessment is for your benefit and best taken without any preparation or reference materials, so your skills can be objectively measured.

Take your FREE Skill Assessment test »

Back to Top

Award winning, world-class Instructors

David M.
- Networking expert with several Cisco certifications, including CCENT, CCNA, CCDA, CCSI, and CCVP. - Has taught over 90 courses at NetCom Learning. - Average rating of 8.75 out of 9 on student evaluation reports.

Bio:

David has been in the Networking field for the past eleven years and holds several Cisco certifications. He has been an instructor since 2005 and has taught over 90 courses at NetCom Learning.

David is an extremely enthusiastic trainer with a raw passion towards teaching and delivering Cisco information and takes great pride in his career as an instructor, which has lead him to develop and deliver the class in his own unique way; very professional and knowledgeable, yet pleasant and enjoyable. His classes have a high passing rate for students taking certification exams, and averages 8.75 out of 9 on evaluation reports.
Michael G.
- Over 22 years of professional experience in the IT field, including more than a decade as a Certified Trainer.
- An expert in Cisco's Routing, Switching, Security, Voice and Wireless areas, as well as select Microsoft, Novell, CompTIA, Sun and CWNP courses.
- High-skilled and acclaimed instructor. Has trained over 900 students at Netcom Learning.

Bio:

Michael has over 22 years of professional experience in the IT field, including more than a decade as a Certified Trainer. An expert in Cisco's Routing, Switching, Security, Voice and Wireless areas, Michael also teaches select Microsoft, Novell, CompTIA, Sun and CWNP courses.

Michael's dedication and passion for teaching is unmatched. He has trained over 900 students at Netcom Learning since 2006 and his evaluation scores average 8.7 out of 9.
William D.
- Bachelors and Masters in Mathematics from University of Pennsylvania, in addition to several IT certifications.
- Over 20 years of experience in the IT industry; background ranges from engineering, administration and escalation support in networks.

Bio:

William is a highly-skilled IT professional with Bachelors and Masters Degree in Mathematics from University of Pennsylvania. He has been working in the IT industry for over 20 years, with experience in engineering, administration and escalation support in networks ranging from small to large scale complex enterprise environments.

As a Cisco and CompTIA Subject Matter Expert, he holds several certifications, including Cisco CCNA, CCNP, and CCIE. William is one of NetCom's top trainers, consistently scoring high marks in student evaluations.

See more...   See more instructors...

Back to Top

Recent Client Testimonials & Reviews

Very knowledgeable instructor. True subject matter expert.

- Dameon R.

Course(s) Taken

» Implementing Cisco Voice Communications and QoS v8.0 - CVOICE

The instructor knows his material very well.

- Hung N.

Course(s) Taken

» Implementing Cisco Voice Communications and QoS v8.0 - CVOICE

Good Training company with whom we have a history.

-Swaminathayer M.
Course(s) Taken

» Deploying Cisco ASA Firewall Solutions v2.0 - FIREWALL

  More testimonials »  

Back to Top